Fire Alarm Systems

We provide Addressable and Conventional Fire Alarm Systems engineered for reliable early detection and rapid emergency response. Our solutions include Fire Alarm Control Panels, Smoke Detectors, Heat Detectors, Multi-Sensor Detectors, Manual Call Points, Sounders, Strobes, Input/Output Modules, Repeater Panels, Beam Detectors, and Aspirating Smoke Detection Systems.
Fire alarm systems can also be integrated with IBMS/BMS, Public Address & Voice Evacuation, Access Control, HVAC, Fire Dampers, Elevators, and other life-safety systems to enable coordinated emergency response and centralized monitoring.

Gas Suppression Systems

For areas where conventional water-based firefighting may damage sensitive equipment, Scube Tech Services provides Clean Agent Gas Suppression Systems for data centers, electrical rooms, UPS rooms, server rooms, control rooms, and other mission-critical spaces. Our solutions include FK-5-1-12 clean-agent systems, FE-36 systems, detection and releasing panels, cylinders, discharge nozzles, pressure switches, warning devices, manual release/abort stations, and associated safety controls.
We support projects from initial system planning through installation, testing, commissioning, system integration, documentation, training, preventive maintenance, and AMC support, delivering dependable and professionally engineered fire and life-safety solutions.

Addressable Fire Detection System

An Addressable Fire Alarm System precisely identifies the location of a fire incident by assigning a unique address to each connected device (smoke detectors, heat detectors, MCPs, etc.). This helps in:

Accurate pinpointing of the affected area.

Faster response time.

Advanced monitoring through fire alarm control panels

Integration with BMS, HVAC shutdowns, and emergency lighting systems.

Components include:

Smoke & Heat Detectors

Manual Call Points (MCP)

Notification Devices (Hooters, Sounders, Strobes)

Fire Alarm Control Panel (FACP)

Repeater Panels and Graphic Annunciators (optional)

Fire Suppression System

Fire suppression systems are designed to extinguish fires automatically or manually using specialized agents, minimizing damage and downtime. These systems are commonly used in data centers, electrical panels, server rooms, and high-risk industrial zones.

Types we offer:

Clean Agent Systems (e.g., Novec 1230, FM-200)

safe for electronics, leaves no residue.

COâ‚‚ Suppression Systems

ideal for unoccupied areas like transformer rooms

Water Mist Systems

uses fine water spray for cooling and fire control.

Foam Suppression Systems

effective for flammable liquids in oil & gas facilities.

Why Choose Scube Tech Services?

  • Certified and compliant with local fire safety standards
  • Integration with IBMS, CCTV, PA & Emergency systems
  • AMC, testing, training, and 24x7 emergency support
  • Partnerships with leading OEMs in fire and life safety

Fire Extinguishers

Portable Fire Extinguishers provide the first line of defense in case of fire, especially for small-scale incidents. We supply, install, and maintain various types of ISI-certified extinguishers based on the fire risk category.

ABC Dry Powder

COâ‚‚

Foam

Water

Clean Agent

Devices Used

  • Smoke Detectors (Ionization, Photoelectric)
  • Heat Detectors (Fixed Temperature & Rate-of-Rise)
  • Manual Call Points (Break Glass Units)
  • Manual Call Points (Break Glass Units)
  • Conventional Fire Alarm Control Panel
  • Hooters/Sounders
  • Fire Alarm Cables
  • Zone Monitor Modules (for interfacing)

Fire Alarm Control PanelPanel

  • The brains of the system
  • Provides power to the system, monitors inputs and controls outputs through various circuits.
  • Performs other functions as required by the appropriate code.

Every device connected to the addressable system has its own unique address. When a fire is detected, the device’s address shows up on the main control panel, telling us exactly which device has been activated. This will enable us to find the exact location of a fire and extinguish it quickly.

  • Each device (detector, pull station…) has a unique number assigned to it called the address for reporting alarms and troubles.
  • Employs a Signaling Line Circuit (SLC) Loop along which all addressable input and output devices are connected to the fire alarm control panel.
  • Addressable devices transmit an electronic message back to the Control Unit representing their state (Normal, Alarm, Trouble) when polled by the Control Unit.
With a conventional system, there is no way of pinpointing the exact location of the fire. By wiring your building into different zones, one can get a general idea of where the fire is. For instance, if you have two floors, you could wire the first as ‘zone and the second as zone 2. So, if a fire occurs in zone 1, you know that the fire is somewhere on the first floor.
  • The simplest type of control unit. Generally, a single circuit board contains a power supply, control, initiating and notification circuitry.
  • Some models use auxiliary circuit boards to perform special functions.
  • Input/output devices connect to dedicated circuits.
  • Designated outputs occur when initiating signals are received.
  • Limited special functions and capabilities.

Input Device

A fire alarm system can have a variety of input devices. We divide it into two parts, one is Initiating Device and one is Initiating Device Circuit (IDC). A system component that originates transmission of a change of state condition, such as a smoke detector, manual fire alarm box, supervisory switch, etc is known as Initiating Device. A circuit to which automatic or manual initiating devices are connected where the signal received does not identify the individual device operated is known as a Initiating Device Circuit (IDC)

Input Device

Fire Alarm Hooter

The Fire Alarm Hooter is a device which produces sound when a sensor senses any kind of fire activity.

Horns

Loud and distinctive output. Often used in high-noise environments. such as manufacturing plants

Control Module

They is the output side. It activates warning devices like a bell or horn strobe.

Horns Strain

Visual signalling appliances are used in high-noise environments, in areas occupied by hearing-impaired.

Bells

Only used if they are only for fire, or have a distinctive sound from other bell signalling devices.

Addressable Fire
Alarm Systems

Addressable systems are intelligent systems that offer pinpoint accuracy and control, making them suitable for complex infrastructure such as commercial towers, hospitals, malls, hotels, and industrial facilities.

Each device has a unique address, enabling the system to identify the exact location of a fire or fault, allowing quick and accurate response.

Key Features

  • High scalability and flexibility
  • Device-level monitoring and control
  • Real-time diagnostics and logging
  • Easy integration with BMS, HVAC, PA, Sprinkler, and Access Control systems
  • Compliant with NFPA, IS, and international fire safety standards

Devices Used

  • Addressable Smoke and Heat Detectors
  • Multi-Sensor Detectors
  • Addressable Manual Call Points
  • Intelligent Control Panels (1-loop to multi-loop)
  • Addressable Hooters with Flasher
  • Loop Isolators
  • Repeater Panels (for multi-building or high-rise towers)

Scube Tech Services specializes in integrating Fire Alarm Systems with :

  • Building Management System (BMS)
  • Public Address/Voice Evacuation Systems
  • Sprinkler and Fire Suppression Systems
  • Access Control & Emergency Lighting Systems
  • Site Survey & Risk Assessment
  • System Design and BOQ Preparation
  • Installation & Wiring by Certified Technicians
  • Testing, Commissioning, and AMC
  • Fire NOC Documentation Assistance
  • Client Training & System Handover
  • 10+ years of domain expertise
  • Collaboration with top OEMs like Honeywell, Siemens, Ravel, GST, Agni, etc
  • Project execution in IT Parks, Hotels, Hospitals, Warehouses, and Data Centers
  • End-to-end compliance with IS2189 and NFPA codes
  • Corporate Buildings & Commercial Complexes
  • Industrial Warehouses and Manufacturing Plants
  • Educational Institutes & Hospitals
  • High-rise Residential Societies

Our Brands Partners

Item 1
Item 1
Item 1
Item 1
Item 1
Item 1
Item 1
Item 1
Item 1
Item 1
Item 1
Item 1
Item 1
Item 1

About Us

ScubeTech delivers advanced security integration solutions with certified expertise, proven project success, and a strong network, ensuring reliable, customized protection for businesses across India and beyond.

Follow Us

Our Solutions

Contact Us

Scube Tech Copyright@2025. All Right Reserved. Design & Developed by Web Indore